B-TEK Scales T405S, Service Manual

Page: 115 / 156

T405S Indicator Service Manual 115
10.2 Editing an existing print string
3. To move the string index position to the start of the Tare weight output
(SP character 32), press the
UNITS key until the display shows …
4. You need to delete all characters from index position 25 through 36 to remove
the entire Tare weight line. Press and hold the
TARE key for two seconds to
delete the displayed character. The remaining characters shift to this index
position. Repeatedly press and hold the
TARE key until the display shows …
5. This is the start of the Net weight output (SP character 32, see current index
position 37).
6. Press the ZERO key when finished with the edit process to accept these
changes and return to PrnFt1 display.
7. Press TARE or F1 until …
SAVE no is displayed.
8. Press UNITS …
SAVEYES is displayed.
9. Press ZERO to save.
After the indicator reboots press the PRINT key to test the results. The following should
be printed:
GROSS
lb
GROSS
lb
Gross 272.04 lb
Net 176.16 lb
At any time during a string edit you can press F1 to abort the print format editor
without affecting the existing print string. This allows for an ESCAPE if you think you
may have made an error during the editing process.