Avaya Media Gateway G350, Maintenance Manual

Page: 118 / 332

Avaya Communication Manager controlled maintenance
DIG-LINE (Digital Line)
118 Maintenance of the Avaya G350 Media Gateway
June 2004
It is helpful to understand what is meant by the different service states that may exist. The different
service states which apply to digital line station are explained as follows:
Programmable Terminals
The following information is presented to help you understand how maintenance software interacts with
terminal parameter downloading.
NOTE:
MM711 supports 8410D and 8434D terminals
MM711 (2-wire, 8-port, A-law/mu-law selectable)
Downloadable Terminal Parameters
The following parameters are downloaded to programmable terminals:
Out-of-Service The port, and thus the station, have been removed from service. Busyout puts
the port in the out-of-service state.
Ready-for-
Service The port on the Media Module has been put into service, but the voice terminal
has not yet established signaling communications with the port.
In-Service The voice terminal has established signaling communications with the port,
and the system is ready to process calls to and from that station. A terminal in
the ready-for-service state will progress to the in-service state if it is
functioning normally. It can also be forced into the in-service state by going
off-hook.
Table 62: Parameters Downloadable to Programmable Terminals
Parameter Scope Terminal
International Flags (A-law/mu-law, Display Mode, DLI
Voltage level) System level 84xx, 603x,
302B1
Primary Levels
(Transmission & Sidetone) System level 84xx, 603x,
302B1
Adjunct Levels
(Transmission & Sidetone) System level 84xx
Handset Expander Option System level 84xx
Administrable Options (Speakerphone & Mute Button) Per-terminal 84xx
Administrable Softkeys Per-terminal,
System level 8410D, 8434D