Avaya Media Gateway G350, Maintenance Manual

Page: 30 / 332

G350 component maintenance
G350 component maintenance
30 Maintenance of the Avaya G350 Media Gateway
June 2004
Reinserting the S8300 Media Server
To reinsert the S8300 Media Server into the G350:
1
Insert the S8300 into slot v1 of the G350 (refer to Figure 2, Align the S8300 Media Server/LSP,
on page 30).
2
With the optional CWY1 and hard drive attached to the S8300 board, insert the S8300 board
about 1/3 of the way into the guides (the guides are in slot v1 for the S8300).
3
Push both boards (together) back into the guides, gently and firmly, until the front of each board
aligns with the front of the G350.
4
Secure the S8300 faceplate with the thumb screws. Tighten the thumb screws with a screw driver,
in the clockwise direction.
5
Replace the plate between slots V1 and V2, labelled “Remove before removing or inserting
S8300 module”.
Figure 2: Align the S8300 Media Server/LSP
!
WARNING:
To prevent access to electrical hazards by unauthorized personnel and to ensure continued
compliance to international radiated emissions requirements, all captive screws must be securely
tightened such that they cannot be loosened without the use of a tool.