Avaya Cajun P580, User Manual, Page: 148 / 770

5-14 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 5
CAUTION:
Avaya recommends that you not modify the predefined groups.
When you install v6.0, the existing community strings are assigned to
these predefined groups. If you modify them, the community strings
may lose their access to the switch. For more information on the
migration of existing community strings, see “
Migration of Existing
Community Strings .”
Viewing Configured Groups
To view the currently configured groups, use the following CLI command:
#
show snmp group [<groupname>]
Deleting a Group
To delete a specific group or all groups of a specific group name (if multiple
groups have the same group name), use the following CLI command:
(configure)# no snmp-server group <groupname> {noAuth | auth |
priv}
If multiple groups have the same group name, you must enter the
appropriate security keyword (noAuth, auth, or priv) to delete one of the
groups. If you do not enter a security keyword, all groups of the group name
that you enter are deleted.
Table 5-6. snmp-server group Command
Parameter Definition
<groupname> The name of the group that you want to create or
modify. The group name can range from 1 to 32
alphanumeric characters.
noAuth Requires neither authentication or encryption of
PDUs.
auth Requires authentication but not encryption of PDUs.
priv Requires authentication and encryption of PDUs.
<readview> The MIB view to which you want the group to have
read access.
<writeview> The MIB view to which you want the group to have
write access.
<notifyview> The MIB view for which you want the group to
receive trap messages.