Avaya Cajun P580, User Manual, Page: 678 / 770

25-18 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 25
Displaying the Priority of a MAC Address
Command
Use the show aft entry command to display the priority of a source MAC
address or destination MAC address. The syntax of the command is:
>
show aft entry [mac <wildcard-mac-address>] [VLAN {<VLAN-id> |
name <VLAN-name>}] [port-binding {cpu | filter | forward [<mod-port-
spec>]}] [status {learned | management | self | multicast}]
Setting a Physical Port to Use DiffServ
Command
Use the set port use-diffserv command to set a port to classify bridged IP
traffic by its DiffServ code point (DSCP). The syntax for the command is:
(
configure)#
set port use-diffserv {{<mod-num> | <mod-swport-
range>} [..., {<mod-num> | <mod-swport-range>}] | all-ports} {on | off}
Table 25-10. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
<mod-num> The slot number of a module. If you specify
<mod-num>, all ports on the module are set
to use DiffServ.
<mod-swport-range> The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the port
or range of ports on the module that you
specify is set to use DiffServ.
{all-ports} All ports in the chassis. If you enter all-ports,
all ports in the chassis are set to use DiffServ.
{on | off} Indicates whether the switch uses the DSCP
to classify bridged IP traffic on the ports that
you specify:
• Enter on to classify traffic by DSCP.
• Enter off to ignore the DSCP.
The default setting is off.