Avaya Cajun P580, User Manual, Page: 542 / 770

19-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 19
4. Click APPLY to add the static route, or CANCEL to restore previous
settings. When you click APPLY, you are returned to the AppleTalk
Static Route dialog box. See
Figure 19-9 .
Figure 19-9. AppleTalk Static Route Dialog Box.
CLI Command
To create an AppleTalk static route using the CLI, enter the following
command in Interface mode:
(config-if:<interface-name>)# appletalk static
cable-range <cable-range> to <network.node>
[floating] zone <zone-name>
Editing AppleTalk Static Routes
You can edit AppleTalk Static routes using either the Web Agent or the CLI.
Web Agent
Procedure
To edit an AppleTalk static route using the Web Agent:
1. Select Static Route from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk Static Route dialog
box opens (
Figure 19-7 ).
Type Select the type of static route. The options include:
• High - The static route is not superseded by a
route update.
• Low - The static route can be superseded by a
route update.
Zone Enter an AppleTalk zone name assigned to this route.
Zone names may be up to 32 characters in length.
Table 19-2. Add AppleTalk Static Route Dialog Box Parameters
Parameter Definition
2 of 2