Avaya Cajun P580, User Manual, Page: 384 / 770

12-68 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 12
CLI Command
To display the DVMRP route table using the CLI, enter the following
command from configuration mode:
(configure)#
show ip dvmrp routes
Displaying the DVMRP Upstream Routers
Web Agent
Procedure
To view the DVMRP upstream routers:
1. Select Route Table from the Routing > DVMRP group on the Web
Agent window, The DVMRP Route Table dialog box opens
(
Figure 12-33 ).
2. Select the number in the Upstream Router(s) column to view
information on the upstream routers. The Upstream Router(s) dialog
box opens.
3. See Table 12-24 for an explanation of the DVMRP Upstream Router(s)
dialog box parameters.
Displaying the DVMRP Designated Forwarder(s) Table
Web Agent
Procedure
To view the DVMRP Designated Forwarder table:
1. Select Route Table from the Routing > DVMRP group on the Web
Agent window. The DVMRP Route Table dialog box opens (see
Figure 12-33 ).
2. Select the number from the Designated Forwarder column for the
appropriate source network. The Designated Forwarder(s) Table
dialog box opens (see
Figure 12-34 ).
Table 12-24. DVMRP Upstream Router(s) Dialog Box
Parameters
Parameter Definition
Router Network Address Displays the router network address.
Router Cost to Source
Network Displays the cost metric.
Found on Interface Displays the interface on which the upstream
router was found.