Avaya Cajun P580, User Manual, Page: 393 / 770

Document No. 650-100-700, Issue 1 12-77
Configuring IP Routing
Web Agent
Procedure
To enable an VRRP on an interface using the Web Agent:
1. Select Interfaces from the Routing > IP > Configuration group on the
Web Agent window. The IP Interfaces dialog box opens ( Figure 12-
37 ).
Figure 12-37. IP Interface Dialog Box
2. Select the interface on which you want VRRP to be enabled.
3. Select Enable from the VRRP field pull-down menu for the interface
you selected.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
CLI Command
To enable an VRRP on an interface using the CLI, enter the following
command in Configure/Interface mode:
(config-if: <if name>)#
ip vrrp
Creating a VRRP Virtual Router
You can create a VRRP router using either the Web Agent or the CLI.
Web Agent
Procedure
To create a VRRP router from the Web Agent:
1. Select VRRP from the Routing > IP > Configuration group on the Web
Agent window. The VRRP Virtual Routers dialog box opens
(
Figure 12-38 ).