Avaya Cajun P580, User Manual, Page: 105 / 770

Document No. 650-100-700, Issue 1 3-13
Configuring System Information
CLI Command
To check the temperature status, use the show temperature CLI command.
To set the temperature thresholds, use the following CLI commands:
■
(configure)#
set temperature {supervisor-slot | backplane-
sensor | cpu-sensor | probe} shutdown <temperature>
■
(configure)#
set temperature {supervisor-slot | backplane-
sensor | cpu-sensor | probe} warning {upper | lower | low-limit}
<temperature>
Displaying the Power System Statistics
You can display the statistics for your switch’s power system from the either
the Web Agent and the CLI.
Web Agent
Procedure
To display your switch’s power system statistics using the Web Agent:
1. Select Power System from the System > Configuration group on the
Web Agent window. The Power System dialog box opens with your
switch’s current power statistics (
Figure 3-8 ).
Figure 3-8. Power System Window