Avaya Cajun P580, User Manual, Page: 151 / 770

Document No. 650-100-700, Issue 1 5-17
Configuring SNMP
This command displays the following information:
■
User name
■
Group to which the user belongs
■
Authentication protocol that is used for the authentication and
encryption passwords:
MD5
,
SHA
, or
None
if authentication is not
enabled.
■
Localized authentication key of the user if authentication is enabled.
For information on localized keys, see “
Authentication and
Encryption .”
■
State of encryption,
Yes
if enabled, or
No
if disabled.
■
Localized encryption key of the user if encryption is enabled. For
information on localized keys, see “
Authentication and Encryption .”
Deleting a User
To delete an SNMPv3 user, use the following CLI command:
(configure)#
no snmp-server user <username>
Changing a User Password
You must change user passwords when the engine ID changes.
To change a user password, use the following CLI command:
(configure)#
snmp-server password <username>
The switch prompts you to enter the new password or passwords. The
passwords are case-sensitive and can range from 8 to 64 characters. For
security reasons, the CLI does not display the passwords when you enter
them.