Avaya Cajun P580, User Manual, Page: 322 / 770

12-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 12
* Note: If you modify the ARP Timeout value, the new value does
not take affect when you click on APPLY.You must, in
addition to changing the ARP Timeout value, change the
Admin State to Down, then change the ARP Timeout
value, and then change the Admin state back to Up for that
Interface.
This procedure can be done when you change the ARP
Timeout value. If not already selected, select Interfaces
from the Routing > IP > Configuration group on the Web
Agent window. The IP Interfaces dialog box opens
(
Figure 12-2 ).
Click on the Select checkbox for the Interface, change the
Admin State to Down, then click on APPLY. Again select
the interface, enter the new value of the ARP Timeout
period, and change the Admin State parameter to UP, then
click on APPLY.
3. To delete an IP interface first click on Select, to select the specific
interface then click on DELETE.
4. See Table 12-1 for an explanation of the IP Interfaces dialog box
parameters.
Creating and Assigning IP Interfaces to the
VLAN
Web Agent
Procedure
After you have set up a VLAN, you must create the IP interface that your
VLAN and your subnet uses to communicate with each other. While
creating the IP interface, you must assign it to the VLAN. The last step is to
enable IP forwarding (Routing) global parameters.
1. Select Interfaces from the Routing > IP > Configuration group on the
Web Agent window. The IP Interfaces dialog box opens ( Figure 12-2 ).
2. Click CREATE. The Add IP Interface dialog box opens ( Figure 12-
3 ).To create a new IP interface and assign it to a VLAN.