Avaya Cajun P580, User Manual, Page: 650 / 770

23-18 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 23
CLI Command
Use the following CLI commands to configure Fabric mode 2 port
mirroring. You must be in Global Configuration command mode to enter
these commands.
To set up port mirroring, use the following CLI command:
(configure)#
set port mirror Fabric_mode2 source-port <mod-
port-range> mirror-port <mod-port-spec> channel <channel> direction
{tx | rx | both | sa | da} sampling {always | disable | periodic} [sa <MAC-
address>] [da <MAC-address>] [max-packets-sec <max-packets-sec-
value>]
Removing a Fabric Mode 2 Port Mirror
Web Agent
Procedure
To remove a port mirror on a switch in Fabric mode 2 by using the Web
Agent:
1. Expand the Modules & Ports folder.
2. Click Port Mirroring.
The Port Mirroring Information page opens.
3. In the Source Port column, select None for the port mirror that you want
to remove.
4. Click Apply.
CLI Command
To remove a port mirror from a switch in Fabric mode 2, use the following
CLI command from configure mode:
(configure)#
clear port mirror Fabric_mode2 channel <channel>
Viewing Information about a Fabric Mode 2 Port Mirror
Web Agent
Procedure
To view information about a Fabric mode 2 port mirror:
1. Expand the Modules & Ports folder.
2. Click Port Mirroring.
The Port Mirroring Information page opens. This page displays
information about all port mirrors that are setup.