Avaya Cajun P580, User Manual, Page: 491 / 770

Document No. 650-100-700, Issue 1 16-9
Configuring IPX Routing
CLI Command
To begin the creation of a new IPX interface using the CLI, enter the
following command in Configure mode:
(configure)# interface <interface name>
Creating IPX Static Routes
You can create IPX static routes using either the Web Agent or the CLI.
Web Agent
Procedure
To create IPX static routes using the Web Agent:
1. Select Static Routes from Routing > IPX > Configuration group on
the Web Agent window. The IPX Static Routes dialog box opens (see
Figure 16-6 ).
Figure 16-6. IPX Static Routes Dialog Box
RIP Select Disable to prevent IPX RIP from routing globally.
This affects all IPX interfaces set up to use the IPX RIP
routing protocol. The default value is Enable.
SAP Select Disable to prevent IPX SAP from routing
globally. This affects all IPX interfaces set up to use the
IPX SAP routing protocol. The default value is Enable.
Type 20 Packet
Propagation Specify whether or not Type 20 packets can be sent,
received, disabled, or sent and received on a given
interface.
Options include:
Disable - Type 20 packets are neither sent nor received.
Inbound - Type 20 packets are received.
Outbound - Type 20 packets are sent.
Both - Type 20 packets are sent and received.
The default value is Disable
Table 16-3. IPX Interface Dialog Box Parameters
Parameter Allows you to...
2 of 2