Avaya Cajun P580, User Manual, Page: 450 / 770

14-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 14
CAUTION:
CLI Command
To view RIP statistics using the CLI, enter the following command from
Configure mode:
(configure)# show ip rip statistics
NBMA IP Interfaces
Overview
Non-broadcast multi-access (NBMA) functionality was added to RIP and
OSPF routing protocols on the Avaya Multiservice switch software. Support
for this functionality was added to enable route exchange over nonbridged
connections (routed PVCs).For more information about NBMA, see
“
NBMA IP Interfaces ” in Chapter 15 , “ Configuring the OSPF Routing
Protocol ”.
The NBMA feature is not backward compatible. If you have NBMA
interfaces set up and need to downgrade from v6.0 to a 5.2 version
of software, contact technical support.
Bad Packets
Received Number of bad packets received on this interface.
Bad Routes Received Number of bad routes received on this interface.
Table 14-4. RIP Statistical Parameters
Parameter Defines the...
2 of 2