Avaya Cajun P580, User Manual, Page: 514 / 770

17-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 17
Example #1: Configuring your switch to suppress advertising of
network 10
To configure your switch to suppress the advertising of network 10 on the
IPX interface named Backbone, complete the following steps:
1. Select Filters from the Routing > IPX > RIP group in the Web Agent
window. The IPX RIP Filters dialog box opens ( Figure 17-2 ).
2. Select CREATE to create a new filter. The Add IPX RIP Filter dialog
box opens ( Figure 17-3 ).Configure the following parameters on the Add
IPX RIP Filter dialog box:
a. Select Backbone from the Interface pull-down menu.
b. Enter 0 in the Precedence field.
c. Enter 10 in the Start Network field.
d. Enter 10 in the End Network field.
e. Open the Direction pull-down menu and select Outbound.
f. Open the Filter/Suppress pull-down menu and select Enable.
g. Enter 0 in the Ticks and Hops fields.
3. Click Apply to save your changes, or CANCEL to restore previous
settings.
The filter created in this example ensures that all advertising of network 10
from the interface labeled Backbone is suppressed.
Example #2: Suppress Advertising of all Networks Except 10
To configure your switch to suppress the advertising of all networks except
network 10 on the IPX interface named Backbone, you must first create two
filters.
To create filter 1 from the Web Agent:
1. Select Filters in the Routing > IPX > RIP group on the Web Agent
window. The IPX RIP Filter dialog box opens (see Figure 17-2 ).
2. Select Create to create a new filter. The Add IPX RIP Filter dialog box
opens.
3. Configure the following parameters:
a. Select Backbone from the Interface pull-down menu.
b. Enter 0 in the Precedence field.