Avaya Cajun P580, User Manual, Page: 86 / 770

2-36 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 2
Any changes you make to the switch configuration are automatically
recorded in RAM, but not in NVRAM. When you want to retain your
current configuration, you must manually save it to NVRAM through the
Web Agent or the CLI.
For information about how to save your running configuration file to your
startup configuration, see “
Copying Configuration Files ” later in this
chapter. Always view and compare your running and startup configuration
files to determine changes that you made to your running configuration.
* Important: Do not copy the startup configuration to the running
configuration. The switch does not support this
activity. If you need to reapply the startup
configuration, restart the switch.
* Note: If you initialize NVRAM (nvram initialize command), all
switch settings except the following are reset to their default:
• Startup image
• Fabric mode
• 48-port mode
You can manage the files that contain the configuration data for your
multiservice switch from either the Web Agent or the CLI.
Viewing the Running Configuration
You must have administrator access to view the running configuration.
Web Agent
Procedure
To view the running configuration:
1. In the navigation pane, expand the System > Configuration >
Configuration Files folders.
2. Click Running Config. The Running Configuration Web page is
displayed in the content pane.
CLI Command
To view the running configuration, use the following CLI command:
#
show running-config