Avaya Cajun P580, User Manual, Page: 336 / 770

12-20 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 12
Figure 12-6. Add IP Static Route Web Page
4. Configure the static route as appropriate. See Table 12-5 for an
explanation of the Web page fields.
5. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 12-5. IP Static Route Parameters
Field Explanation
Network Address Enter an IP network address for your IP static route.
Mask Enter an IP subnet mask for your IP static route.
Next-Hop Address Enter an IP address for the gateway associated with
the IP static route.
The default setting is null 0, which creates a discard
route. For information on creating a discard route, see
“
Creating a Static Route to a Null Interface .”
Cost Enter the metric between this router and the
destination.
Preference Select a low or high routing preference from the
Preference field pull-down menu.
Preference overrides cost. If two routes of the same
preference are present, the switch uses the route that
has the lower cost.