Avaya Cajun P580, User Manual, Page: 539 / 770

Document No. 650-100-700, Issue 1 19-9
Configuring AppleTalk Routing
11. Enter the new network range start number in the Network Range Start
field.
12. Enter the new network range end number in the Network Range End
field.
13. Enter the new network number to be associated with the interface in the
Network Number field.
14. Enter the new node number to be associated with the interface in the
Node field.
15. Select Enable from the Admin. State field pull-down menu.
16. Select the new default zone associated with the interface from the
Default Zone field pull-down menu.
17. Select the AppleTalk interface that you want to update in the Select
column.
18. Click APPLY to save your changes, or CANCEL to restore previous
settings.
* Note: You may select and change multiple interfaces
simultaneously with one APPLY operation.
CLI Command
To edit an AppleTalk interface using the CLI, enter the following command
from Interface mode:
(config-if:<interface-name>)# appletalk <options>
Deleting an AppleTalk Interface
You can delete an AppleTalk interface using either the Web Agent or the
CLI.
Web Agent
Procedure
To delete an AppleTalk interface using the Web Agent:
1. Select Interfaces from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk Interfaces dialog box
opens (
Figure 19-6 ).
2. Select the AppleTalk interface that you want to delete from the Select
column.
3. Click DELETE to remove the AppleTalk interface.