Avaya Cajun P580, User Manual, Page: 616 / 770

21-16 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 21
■
To set IP addresses of remote syslog servers,
(configure)#
set
syslog server_ip <ip_address>
■
To set a severity level,
(configure)#
set syslog severity
{emergency | alert | error | warning | normal | informational}
■
To view the current configuration for syslog even reporting,
>
show syslog config
■
To view events in the syslog buffer,
>
show syslog buffer
Configuring Utilization Monitoring
Overview
Utilization monitoring makes it possible for you to monitor utilization of
the:
■
CPU—the number of packets per second that the CPU on the
supervisor module routes (slow path).
■
Forwarding engine—the number of packets per second that the 80-
series forwarding engines route. This statistic includes packets
routed by the forwarding engines on 80-series media modules
(FIRE) and on the supervisor module (FORE).
For more information about the slow path and FIRE and FORE paths, see
“
Routing Overview ” in Chapter 1 , “ Introduction .”
For each of these statistics, you can set a high threshold. If this threshold is
exceeded, the switch logs the event in the event log, displays a message in
the CLI, and sends an SNMP trap to the Trap receiver.
This section contains procedures for the following tasks:
■
Enabling Utilization Monitoring
■
Enabling Event Logging of Utilization
■
Setting a Utilization Threshold
■
Viewing Utilization Settings
■
Viewing CPU Utilization Statistics
■
Viewing Statistics for Forwarding Engine Utilization
You can configure utilization monitoring only by using the CLI. This
feature is not available in the Web Agent.