Avaya Cajun P580, User Manual, Page: 405 / 770

Document No. 650-100-700, Issue 1 12-89
Configuring IP Routing
CLI Command
To enable IRDP on an interface using the CLI, enter the following
command in Enable/Configure/Interface mode:
(config-if: <if name>)#
ip irdp
Configuring LDAP
Lightweight Directory Access Protocol (LDAP) allows you to access the
“Access Control Lists”(ACLs), retrieve them from a database on an LDAP
server, and apply them to the Avaya P580 or P882 Multiservice switches.
You can also:
■
View LDAP statistics for the switch
■
Configure a primary and secondary LDAP server
■
Configure a search base for the switch to contact in response to an
LDAP request.
Configuring a secondary server ensures that LDAP requests can be fulfilled
if a primary server fails. The LDAP client sends a search for access control
lists to the primary server if the client finds the primary server. The primary
server retrieves the access lists from the LDAP database and returns them to
the switch’s LDAP client. If the client does not find the primary server and
if the primary server does not respond after three retries, the client tries to
connect to the secondary server. If the secondary server fails after three
retries, the client times out. The LDAP client applies the access lists to
manage the way traffic is forwarded.
Configuring LDAP Settings
You can configure LDAP settings from either the Web Agent or the CLI.
Web Agent
Procedure
To configure LDAP settings from the Web Agent:
1. Select LDAP Configuration from the Routing > IP > Configuration
group on the Web Agent. The LDAP Configuration dialog box opens
(
Figure 12-42 ).