Avaya Cajun P580, User Manual, Page: 212 / 770

7-24 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 7
6. Click APPLY to save your changes or CANCEL to restore the previous
settings.
For information about all other switch port settings, see “ Configuring
Switch Ports Settings ” in Chapter 8 , “ Configuring Ports .”
CLI Commands
Use the following CLI commands to configure Spanning Tree settings for a
switch port:
■
To enable or disable Spanning Tree on a port,
(configure)#
set port spanning-tree-mode {<mod-num> | <mod-swport-
range>} [...,{<mod-num> | <mod-swport-range>}] {disable |
enable}
■
To specify whether a port is connected to a shared LAN segment or
a point-to-point LAN segment,
(configure)#
set port point-
to-point admin status {<mod-num> | <mod-swport-range>}
[...,{<mod-num> | <mod-swport-range>}] {force-true | force-false
| auto}
■
To specify whether this port is an edge port or a nonedge port,
(configure)#
set port edge admin state <mod-swport-
range> [...,<mod-swport-range>] {edge-port | non-edge-port}