Avaya Cajun P580, User Manual, Page: 75 / 770

Document No. 650-100-700, Issue 1 2-25
Setting Up the Switch
* Note: If you reconfigure the serial port as a PPP console, you can only
change the switch’s baud rate and flow control parameters.
The flow control parameters are limited to None or Xon/Xoff.
Configuring the Serial Console Port as a TTY Console
You can configure the serial port as a TTY console using either the Web
Agent or the CLI.
Web Agent
Procedure
To configure the console serial port as a TTY Console using the Web Agent:
1. Select Console Configuration from the System > Configuration group
on the Web Agent. The Console Configuration Web page opens
(
Figure 2-14 ).
Figure 2-14. Console Configuration Web Page
2. Select TTY as the console type and click SELECT. The Console Port
Configuration Web page opens with TTY displayed in the Console
Type field (
Figure 2-15 ).