Avaya Cajun P580, User Manual, Page: 582 / 770

20-18 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 20
3. Select the checkbox next to the static multicast session that you want to
delete.
4. Click DELETE to remove the static multicast session.
CLI Command
To delete a static multicast session using the CLI, enter the following
command from Configure mode:
(configure)# clear intelligent-multicast static-
session <options>
Creating Static Client Ports
You can create and add static client ports using either the Web Agent or the
CLI.
* Note: You can only add static client ports to static sessions on VLANs
that the port is bound to or on sessions created for All VLANs.
Web Agent
Procedure
To create a static client port using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast group on the
Web Agent window. The Static Multicast Sessions dialog box opens
(
Figure 20-9 ).
2. Select the number from the Static Client Ports column. The Static
Multicast Sessions Client Ports dialog box opens ( Figure 20-10 ).
IP Address Displays the IP address associated with the static
multicast session, if available.
Static Client Ports Displays the number of static client ports associated
with the static multicast session and opens the Static
Multicast Session Client Ports dialog box.
Table 20-7. Static Multicast Sessions Dialog Box
Parameter Definition
2 of 2