Avaya Cajun P580, User Manual, Page: 141 / 770

Document No. 650-100-700, Issue 1 5-7
Configuring SNMP
Table 5-1 lists all the predefined views, groups, and users.
Migration of Existing Community Strings
When you install v6.0, the existing community strings are assigned to either
a predefined group or, if previously assigned to a custom access type, a
group of the same name. All community strings that had a security level of
normal are assigned to either the normalRO or normalRW group. All
community strings that had a security level of admin are assigned to either
the adminRO or adminRW group. All community strings that were assigned
Table 5-1. Predefined Views, Groups, and Users
View Group User Community
String
normal—Includes the MIB objects
that the normal security level
included. The view includes all the
supported MIBs except those
objects that are administrator only. normalRO—Provides read-only
access to the normal view. public
normalRW—Provides read-write
access to the normal view.
admin—Includes the MIB objects
that the admin security level
included. The view includes all the
supported MIBs including the
administrator-only objects. The
USM and VACM MIBs are not
included in the predefined admin
view. adminRO—Provides read-only
access to the admin view.
adminRW—Provides read-write
access to the admin view.
restricted initial—Provides read-only access
to the restricted view. initial
internet—Includes all MIB
objects, including the USM and
VACM MIBs. The view is created
for administrative SNMPv3 users
and is assigned to the predefined
internet group, which provides
read-write access to the view. internet
The internet group is accessible
only by SNMPv3. You cannot use
CLI commands to access the
group.
Do not assign the internet group to
a community string. The group
requires both authentication and
encryption, which community
strings do not support.