manualshive.com logo in svg

Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual, Page: 698 / 878

Share
Download
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual Download Page 698

A cylinder is created to represent the trunk of the tee and an extrusion modifier is added to
Modifiers in the part browser.

TIP

You can quickly build a part model using primitives. For information, see 

Primitives

 on page 663.

Modeling the Branch of a Parametric Tee Fitting

Use this procedure to model the branch of the tee fitting based on the center of the trunk. You add the
circular geometry, create the profile, and apply an extrusion modifier.

1

To create the transitional branch of the tee, change the work plane. Right-click YZ Plane and
click Visible; then right-click ZX Plane and click Visible.

The YZ plane is turned off. Its icon is unavailable (shaded) in the part browser. The ZX plane is
the visible work plane in the modeling area.

2

In the part browser, right-click ZX Plane and click Add Profile

 ➤ 

Circular.

The circular 

profile

 on page 659 defines the diameter of a fitting, such as an elbow, and the

connectors. You can add more geometry lines and circular profiles for more complex graphics.

3

Using object snaps with center mode enabled, select the center of the circular profile of the
trunk, and enter 6" (152 mm) for the radius.

680 | Chapter 14   Customizing Catalog-Based Content

Summary of Contents for 235B1-05A761-1301 - AutoCAD MEP 2010















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments