manualshive.com logo in svg

Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual, Page: 247 / 878

Share
Download
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual Download Page 247

Rotating a damper 180 degrees in plan view

In isometric views, if the part, fitting, or takeoff has round connectors on opposite ends, you can also use

the diamond-shaped (  

  ) Rotate grip to rotate the object around its centerline to any angle you specify.

Rotating a damper in an isometric view

AutoCAD MEP displays Rotate grips on all HVAC 

in-line parts

, fittings, and takeoffs with connectors on

opposite ends. However, when necessary to preserve the connectivity of duct runs, the software limits the
available rotation options or hides the grips. For example, in the following illustration, you can rotate the
wye fitting on the left in several ways, but you cannot rotate the wye fitting on the right due to the connected
branch.

A wye fitting with Rotate grips and another without them

When you rotate a part, fitting, or takeoff that is connected to other objects, the software adjusts the
connected objects to maintain their connectivity. For example, the software might make minor adjustments
to the lengths of connected duct segments after you have flipped a fitting. If it cannot adjust the objects, it
disconnects them.

Modifying Components Using Grips | 229

Summary of Contents for 235B1-05A761-1301 - AutoCAD MEP 2010















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments