400 Series Installation and Configuration
DCU 410 Engine Panel Installation
39
Delete Configuration File
Delete any number of configuration files on the DCU.
Configuration Printout
This gives a quick overview of the current configuration.
Save file as
This saves the current configuration of the DCU into a
file. The default file extension is .cfg.
Save CANopen EDS-file
This saves the CANopen I/O electrical datasheet to a file
on your PC.
Upload to DCU
Uploaded files are files transferred to the DCU.
The inbuilt firmware can be updated whenever there is a
new firmware available.
A new configuration file can be loaded into the DCU panel
Firmware update
Select the new DCU panel firmware to upload. The
file
name shall be “dcu410_release.tar.gz”.
The latest firmware release can be obtained from the
Auto-Maskin web site at http://www.auto-
maskin.com/marine_pro/index.php#123
Note! The DCU and RP firmware needs to be matched,
meaning they must have the same major and minor
firmware number, unless he DCU is loaded with firmware
2.11. In which case this 2.11 firmware is compatible with
all RP firmware down to 2.5
For instance, DCU 2.2p2 is a match with RP 2.2, but DCU
2.3 is not a match with RP 2.2.
