400 Series Installation and Configuration
DCU 410 Engine Panel Installation
27
First Power-On Wizard
The DCU will display a
first power-on wizard
at the first
power up after delivery, or after a factory reset of the
panel.
All the settings are available in the menu interface later.
Select Installation Language
Follow on-screen instructions.
Choose Administrator password
Follow on-screen instructions.
Select IP-address
Follow on-screen instructions.
Valid numbers in the first group is 1
–
254, second and
third group is 0
–
254 and fourth group is 2
–
254. Actual
numbers to use will depend on the network in which the
DCU is a member.
Note! The last two digits in the fourth group will set the
engine number for this DCU. For example, entering
192.168.0.211 becomes
“
Engine #11
”
.
Read the chapter Connecting to the DCU to decide which
IP-address to use; see page 31.
Press Save when all four number groups are entered to
change the IP-address of the DCU, then press Next to
continue.
Press Next only, to continue without changing the IP-
address of the DCU.
System Type
Press down arrow to select Engine Application.
Press Edit enter Engine Application menu.
Choose between:
Auxiliary
Combined
Propulsion
Emergency
