40
DCU 410 Engine Panel Installation
400 Series Installation and Configuration
Wallpaper
Select a picture file for the DCU. The file must be of
type .png. Only one user wallpaper may be
uploaded. Uploading a new file will remove the old
one.
Configuration file upload
Select a user configuration file for the DCU. The file
must be of type
file_name.cfg
.
When uploaded, the file is stored in the DCU, and
is later available for use from the User Uploaded
files section, see page 38.
Home
–
DCU
–
I/O Configuration
The I/O section holds menu items for input and output
signals. These are separated into two sections.
Config Inputs
This is where the I/O input channels are
configured, such as 4-20 mA, PT100 and switch
inputs.
Config Outputs
This is the section for configurable outputs. A
signal or function can be assigned to a 24V output
or a relay.
Note! Always remember to press the Submit button after
each change on the configuration pages. No changes will
be saved until this button is pressed!
