80
DCU 410 Engine Panel Installation
400 Series Installation and Configuration
Counters
The DCU calculates and stores engine running hours.
Counter Source
Set the counter source to be either from the J1939 CAN
bus, or from a locally generated counter in the DCU.
Update Local Engine Hours
This updates the local counter to any new value.
Current Engine Hours
Set a new total engine hour setting.
Note! If the Counter Source is J1939, then this setting will
be overwritten when the DCU receives new data on the
J1939 CAN bus.
Fuel Consumption
By inputting the Nominal RPM, Nominal Consumption,
Boost Pressure and Idle/No-Load Constant, the DCU can
calculate an estimated fuel consumption value.
