62
DCU 410 Engine Panel Installation
400 Series Installation and Configuration
Select one of the two relays. Then, for each channel,
select the desired function.
Speed Relays
A Speed Relay is a relay that activates on a certain engine
speed rpm, and deactivates at the same rpm-1.
For instance, speed relay #1 can be configured to activate
at 1200rpm, and will then deactivate at 1199rpm.
Set Event Log to Yes to create an event in the log when
the speed relay activates.
The Speed Relay can be assigned to any configurable
output.
J1939 Outputs
The DCU can transmit J1939 on Idle Bus.
J1939 outputs.
Each channel can be configure to transmit different
SPN/PGN signals.
Special
Transmit Nominal speed to engine (SPN 515)
Start Stop over J1939 (SPN 3452)
