400 Series Installation and Configuration
DCU 410 Engine Panel Installation
29
Press right arrow to select DCU Pickup pulses/rev.
Press up arrow or down arrow to change each digit and
press left arrow or right arrow to scroll through digits to
change. Press Cancel to keep the previous value. Press OK
to choose the new value.
Load a configuration
Press right arrow to load a configuration.
Press up arrow or down arrow to select the configuration
menu entry, or press Next to use the factory default.
Press Edit to enter the configuration menu entry.
Press left arrow or right arrow to scroll through available
configurations.
Press OK to choose configuration.
Press Next to go to the next step.
Done
Press Finished. The DCU will proceed with the new
settings and display the main menu.
