400 Series Installation and Configuration
400 Series Overview
3
Ordering Information
The following parts are available in Marine Pro.
Item
Part #
DCU 410 Engine Control Unit
1006450
DCU 408 Engine Control Unit
1006455
RIO 410 I/O Expansion Unit
1006453
RIO 425 Generator Interface Unit
1006409
RIO 412 Exhaust Monitoring Unit
1006454
SDU 410 Safety Unit
1006451
RP 410 Remote Panel Unit
1006452
MK-14 Relay Expansion
1121341
Ethernet Switch, 5 channels, 24V supply, DIN-rail
1050165
J1939 CAN bus Cable
1009110
IP Camera
1121258
About this manual
This manual has been published primarily for
professionals and qualified personnel. The user of this
material is assumed to have basic knowledge in marine
systems, and must be able to carry out related electrical
work.
Work on the low voltage circuit should only be carried out
by qualified and experienced personnel. Installation or
work on the shore power equipment
must only
be carried
out by electricians authorized to work with such
installations.
Responsibilities
It is the
sole responsibility of the installer
to ensure that
the installation work is carried out in a satisfactorily
manner, that it is operationally in good order, that the
approved material and accessories are used and that the
installation meet all applicable rules and regulations.
