88
RP 410 Remote Panel Installation
400 Series Installation and Configuration
General Overview
The RP 410 is the remote panel for the DCU engine
control unit. It is connected to the Ethernet network
together with the DCU unit, and will
–
after a network
search
–
locate all connected DCU units, and update its
configuration accordingly.
No configuration is necessary on the RP 410. Just connect
it to the network and set user preferences using the menu
interface.
One RP 410 can control and monitor up to eight DCU
units, and there can be an
“unlimited” number
of RP 410
units connected on the same network.
In an installation where multiple (more than one) RP 410
units are installed, the RP 410 units makes sure only one
RP 410 has command of a single DCU at any one time.
