52
DCU 410 Engine Panel Installation
400 Series Installation and Configuration
Display Major and Minor Divider
For the above sensor, select the desired major and
minor divisions in the instrument, for US and
Metric values. The major divider number is
displayed at each major divider.
Display Multiplier
Select a multiplication factor as necessary.
An instrument with displayed range 0-10,000
would display as 0-1,000 with a multiplication
factor of 10. The multiplication factor is displayed
in the instrument (round gages only).
Update Metric and US
When the US section has been completed, then the
web server can calculate the other section, and vice
versa.
Note! The application does not round off values. It
is highly recommended to adjust the calculated
values by hand, and set sensible round figure
values.
Alarming
This section is always completed in the currently selected
system unit. To switch unit, simply press the Unit button
on the DCU 410 front panel.
Event
Select the desired combination of warning, alarm
and shutdown.
Select “RPM dependent” for a
setpoint that varies with RPM, and complete the
boxes.
Alarm Threshold [unit]
Type in the alarm threshold value, in the correct
units.
Delay After Crossing Alarm Threshold
Set the persistence time before the event. Value is
in seconds.
