94
RP 410 Remote Panel Installation
400 Series Installation and Configuration
DCU Connections
This lists the currently connected DCU’s. Press Search to
make the RP search for all connected DCU units on the
network.
When an RP is correctly connected to one or more DCU
units, the RP is automatically updated with the same
instruments and pages as in the DCU.
Ignore certain engines
If a DCU appears on the list that is unwanted, select the
Ignore checkbox for that engine. The DCU (that engine)
is now ignored by the RP.
Cameras
Select the camera type and set the IP-address (as printed
on the camera) for the camera. Up to four cameras can be
installed, and they must have unique IP-addresses.
Camera position
The four cameras are displayed in the RP screen at the
following positions.
Camera 1
Camera 2
Camera 3
Camera 4
IP-address
The reserved camera IP-address range is 192.168.0.220
to 192.168.0.239.
Camera type
Select the correct camera type.
Lock
Select this icon to logout from the System Configuration
section. The password must be entered to re-enter.
