400 Series Installation and Configuration
DCU 410 Engine Panel Installation
77
J1939:2 Request Address
The secondary J1939 channel has to be enabled to be
used as a J1939 interface.
Default for this interface is CANopen.
Setting which address to use for requesting an address
for the DCU, 0xFF is for broadcast.
Default setting is 0x00.
J1939:2 Allowed Address
The secondary J1939 channel has to be enabled to be
used as a J1939 interface.
Default for this interface is CANopen.
Setting for which addresses the DCU will use to present
the configured J1939 signals.
Default setting is Show All.
By selecting No, the user can define up to 10 addresses to
be used by the DCU.
J1939:2 Allowed DM1 Address
The secondary J1939 channel has to be enabled to be
used as a J1939 interface.
Default for this interface is CANopen.
Setting for which addresses the DCU will use to present
the DM1 fault messages.
Default setting is Show All.
By selecting No, the user can define up to 10 addresses to
be used by the DCU.
