ATEN VK2100 User Manual Download Page 39

Page: 39 / 127

Chapter 3. Browser Operation

Capacity

The

Capacity

tab displays information about the space available for storing

viewer profiles on the controller.

Storage

This section shows a graph displaying the percentage of space
available on the controller to upload viewer profiles, as well as:

Space Used

: The amount of space currently being used to store

viewer profiles uploaded to the controller.

Space Available

: The amount of space currently available to

store viewer profiles on the controller.

Total Space

: The total amount of space available to store viewer

profiles on the controller.

Existing Viewer

This section lists all the viewer profiles that are currently stored on
the controller with their name and assigned room. Click

Remove

delete a single viewer profile or

Remove All

to delete all viewer

profiles from the controller.

Summary of Contents for VK2100
































































































































Search results

Summary of Contents for VK2100

Reviews:

Related manuals for VK2100

Brands by name

Popular brands

ATEN VK2100, User Manual

Search results

Summary of Contents for VK2100

Reviews:

Related manuals for VK2100

Brands by name

Popular brands