ATEN VK2100 User Manual Download Page 124

Page: 124 / 127

ATEN Control System User Manual

114

Technical Support

International

For online technical support – including troubleshooting, documentation,
and software updates:

http://eservice.aten.com

For telephone support, see

Telephone Support

, page iv:

North America

When you contact us, please have the following information ready beforehand:

Product model number, serial number, and date of purchase.

Your computer configuration, including operating system, revision level,
expansion cards, and software.

Any error messages displayed at the time the error occurred.

The sequence of operations that led up to the error.

Any other information you feel may be of help.

Email Support

[email protected]

Online
Technical
Support

Troubleshooting
Documentation
Software Updates

http://www.aten-usa.com/support

Telephone Support

1-888-999-ATEN ext 4988

Summary of Contents for VK2100
































































































































Search results

Summary of Contents for VK2100

Reviews:

Related manuals for VK2100

Brands by name

Popular brands

ATEN VK2100, User Manual

Search results

Summary of Contents for VK2100

Reviews:

Related manuals for VK2100

Brands by name

Popular brands