ATEN VK2100, User Manual

Page: 88 / 127

ATEN Control System User Manual
78
6. Under Select Status , add a status to the Condition List:
The High or Low status tells the Monitor to initiate an Action when the
device signal is above or below the threshold setting* for the port:
Digital Input (VDC)
Š High - states that when the voltage signal is above the Upper
Threshold to initiate the Action.
Š Low - states that when the voltage signal is below the Lower
Threshold to initiate the Action.
Digital Input (Dry Contact)
According to an open or closed circuit status for the port:
Š Open - states that when the circuit is Open to initiate the Action.
Š Closed - states that when the circuit is Closed to initiate the Action.
Note: To configure the Upper and Lower threshold for the Digital Input port,
see Properties , page 47 .
7. (Optional) Use the Operator option to add additional High or Low
conditions (see step 4, page 77).
8. Go to the Actions section at the bottom of the page to select the hardware
Device and add the Function to the Action List:
Note: For more information on Functions, see Action , page 59.