ATEN VK2100, User Manual

Page: 92 / 127

ATEN Control System User Manual
82
Search & Upload
The Search & Upload page lets you search for Controllers and upload the
Viewers . Viewers created for each Controller will be listed below the
Controller. The Accessible Room selected for a viewer determines which
Controller it uploads to – based on both having the same room number.
If Controllers can not be found, check the Controller ID Switch on the VK2100
– it should match the ID # of the Controller (VK2100-ID
01 ) in the ATEN
Configurator software.
Search Enter the IP address and click Search to locate a Controller.
Auto Search Click to locate Controllers without specifying an IP address.This
option only searches for controllers on the same local area network.
For controllers across a network device, such as a router or switch,
you must specify the IP address.
Edit Access Key Allows you to change the password required to upload viewers to
the controller and download viewers from the iPad.
These icons can be clicked to enable or disable the Access Key:
Locked : The Access Key is required to upload viewers to the
controller and download viewers from the iPad.
Unlocked : The Access Key is not required to upload viewers to the
controller and download viewers from the iPad.
Note: If you attempt to change the lock status and the Access Key
has been changed from the Dashboard, a window will pop-up and
you will need to enter the new Access Key.