ATEN VK2100, User Manual

Page: 100 / 127

ATEN Control System User Manual
90
Click to create a duplicate of the Action.
Click to add a drop menu into the String.
Click to add an Enter command to the String.
Opens a menu with a list of commands to add to the String.
Click to delete the selected action.
After the string is configured, click Test to test the action.
The serial device must be connected to Serial Port #6 (the very last
serial port to right on the rear of the VK2100) to test the action with a
device.
„ IR
Š Settings – Use the drop-down menu to set the Repeat setting (number of
times a signal is sent): 1 Time , 2 Times or 3 Times (Default) .
Š Function List – Use this section to configure the IR remote functions by
adding actions to the list and using the learn feature.
Click to add an Action.
Click to create a duplicate of the Action