ATEN VK2100, User Manual

Page: 61 / 127

Chapter 5. ATEN Configurator (VK6000)
51
Create Viewer & Design
The Create Viewer & Design tab is for creating the Viewer – the user interface
that controls the devices from an iPad. Create a viewer for each room that has
hardware devices connected to a VK2100.
Viewer Settings The Viewer Settings page appears if no viewer has been created
so that you can set the Viewer Properties. The viewer properties
must be set before you begin configuring the viewer’s pages. When
you are finished, click
Done to begin designing the viewer pages.
See Select Viewer , page 52, for details.
Left Sidebar The left sidebar lists each viewer and its pages.The sidebar allows
you to add viewers and pages. These options become available
after clicking Done on the Viewer Settings page. See
Left Sidebar ,
page 49, for details.
Right Sidebar The right sidebar provides the Graphic Library (page 70) and
Advanced Editor (page 72) options. See Right Sidebar , page 53,
for details.
Viewer Properties The Viewer Properties section allows you to set the basic settings
for the viewer. See Select Viewer , page 52, for details.