Rev D
CHP Max5000 Chassis (Rear Fiber Version)
2-19
■
Configuration > Reboot Module
– Selecting this function causes the SMM-2 to
reboot.
■
Faults > Alarm Configuration
– Selecting this function displays the SMM-2 Alarm
Configuration Window (refer to Figure 2.10), which provides a a variety of
information regarding the alarm parameters including alarm thresholds.
■
Faults > Active Alarms
– Selecting this function displays a list of the SMM-2’s current
alarms.
■
Reset Configuration
– Select this function only after replacing the SMM-2 with a
different type of module. Do not select this function if you are replacing the SMM-2
with a different SMM-2.
Figure 2.8
SMM-2 Module
Properties Window
CAUTION
Rebooting a card is a service-affecting operation.
Summary of Contents for CHP Max5000
