7-14
CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies
Rev D
Figure 7.5
Laptop Computer to
CHP Chassis
Ethernet Connection
3. Open a Command Prompt window and type
telnet 192.168.1.1
, then press the
Enter
key.
4. At the login prompt, type
admin
, then press the
Enter
key.
5. At the password prompt, type
admin
, then press the
Enter
key.
To set the network information, proceed as follows:
1. 1. After login, at the [email protected]> prompt, type
configure
and press the
Enter
key.
2. At the [email protected]% prompt, type
set interfaces
and press the
<TAB>
or
<SPACE>
followed by
?
3. to view all the parts of the IPv4 address command:
eth0
sets the IPv4 address
mask
sets the IP subnet mask
gateway
sets the default gateway
Summary of Contents for CHP Max5000
