7-36
CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies
Rev D
–
system
to modify the SNMP system MIB variables.
–
trap-dest
to add an SNMP trap destination.
3. Press the
Enter
key after the SNMP command string is complete with its options.
NTP
To set NTP (Network Time Protocol), proceed as follows:
1. After login, at the
prompt, type
configure
and press the
Enter
key.
2. At the
prompt, type
set
ntp
<string>
and press the
<TAB>
or
<SPACE>?
key to view the available NTP command options.
3. Press the
Enter
key after the NTP command string is complete with its options.
Date
To set the date, proceed as follows:
1. After login, at the
prompt, type
configure
and press the
Enter
key.
2. At the
prompt, type
set
date
and press the
<TAB>
or
<SPACE>?
key to view the available Date command options.
3. Press the
Enter
key after the Date command string is complete with its options (the
year is optional).
Time Zone
To set the time zone, proceed as follows:
1. After login, at the
prompt, type
configure
and press the
Enter
key.
2. At the
prompt, type
set
timezone
and
press the
Enter
key to
view the available Time Zone command options:
–
1 Africa
–
2 Americas
–
3 Antarctica
–
4 Arctic Ocean
–
5 Asia
–
6 Atlantic Ocean
–
7 Australia
–
8 Europe
Note
If NTP is used, as described above, the Date does not have to be set as
described next.
Summary of Contents for CHP Max5000
