Arris CHP Max5000, Equipment Manual

Page: 138 / 267

6-18 CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies 1508685 Rev D
Figure 6.11
Available
Commands via the
Help Window
8. Change from the default SMM IP address to a new SMM IP address by typing
ip
<IP address Subnet mask Gateway address>.
For example, the following command:
changes the SMM IP address to 155.226.60.11
changes the SMM subnet mask to 255.255.254.0
changes the SMM Gateway address to 155.226.60.240
Note To connect with the SMM, your PC network address must be a different
address than the default SMM IP address (192.168.1.1). Temporarily set the IP
address of your PC within the range of 192.168.1.2 to 192.168.1.254. Obtain the
correct IP address from your network administrator. Once the SMM address is
changed to the correct address and subnet, you will need to set the PC back to its
original configuration. Contact your network administrator if you have problems
setting the addresses.
Note Do not use these IP addresses, obtain the correct SMM IP address information
from your network administrator before changing any information. These
addresses are for example only.
ip 155.226.60.11 255.255.254.0 155.226.60.240
IP Subnet Gateway