ARM Cortex-A53 MPCore Technical Reference Manual Download Page 509

Page: 509 / 635

Embedded Trace Macrocell

ARM DDI 0500D

13-14

ID021414

Non-Confidential

Figure 13-4 TRCSTATR bit assignments

Table 13-5

shows the TRCSTATR bit assignments.

The TRCSTATR can be accessed through the internal memory-mapped interface and the
external debug interface, offset

0x00C

13.8.3

Trace Configuration Register

The TRCCONFIGR characteristics are:

Purpose

Controls the tracing options.

Usage constraints

•

This register must always be programmed as part of trace unit
initialization.

•

Only accepts writes when the trace unit is disabled.

Configurations

Available in all configurations.

Attributes

TRCCONFIGR is a 32-bit RW trace register.
See the register summary in

Table 13-3 on page 13-10

Figure 13-5

shows the TRCCONFIGR bit assignments.

Figure 13-5 TRCCONFIGR bit assignments

1 0

IDLE

RES

PMSTABLE

Table 13-5 TRCSTATR bit assignments

Bits

Name

Function

[31:2]

Reserved,

RES

[1]

PMSTABLE

Indicates whether the ETM trace unit registers are stable and can be read:

The programmers model is not stable.

The programmers model is stable.

[0]

IDLE

Idle status:

The ETM trace unit is not idle.

The ETM trace unit is idle.

RES

12 11 10

5 4 3 2

VMID

CID

RES

CCI

RES

Summary of Contents for Cortex-A53 MPCore
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cortex-A53 MPCore

Reviews:

Related manuals for Cortex-A53 MPCore

Brands by name

Popular brands

ARM Cortex-A53 MPCore, Technical Reference Manual

Search results

Summary of Contents for Cortex-A53 MPCore

Reviews:

Related manuals for Cortex-A53 MPCore

Brands by name

Popular brands