ARM Cortex-A53 MPCore Technical Reference Manual Download

Page: 556 / 635

Embedded Trace Macrocell

ARM DDI 0500D

13-61

ID021414

Non-Confidential

Table 13-57

shows the TRCCLAIMSET bit assignments.

The TRCCLAIMSET can be accessed through the internal memory-mapped interface and the
external debug interface, offset

0xFA0

13.8.55 Claim Tag Clear Register

The TRCCLAIMCLR characteristics are:

Purpose

Clears bits in the claim tag and determines the current value of the claim
tag.

Usage constraints

There are no usage constraints.

Configurations

Available in all configurations.

Attributes

See the register summary in

Table 13-3 on page 13-10

Figure 13-57

shows the TRCCLAIMCLR bit assignments.

Figure 13-57 TRCCLAIMCLR bit assignments

Table 13-58

shows the TRCCLAIMCLR bit assignments.

The TRCCLAIMCLR can be accessed through the internal memory-mapped interface and the
external debug interface, offset

0xFA4

Table 13-57 TRCCLAIMSET bit assignments

Bits

Name

Function

[31:4]

Reserved,

RES

[3:0]

SET

On reads, for each bit:

Claim tag bit is not implemented.

Claim tag bit is implemented.

On writes, for each bit:

Has no effect.

Sets the relevant bit of the claim tag.

RES

4 3

CLR

Table 13-58 TRCCLAIMCLR bit assignments

Bits

Name

Function

[31:4]

Reserved,

RES

[3:0]

CLR

On reads, for each bit:

Claim tag bit is not set.

Claim tag bit is set.

On writes, for each bit:

Has no effect.

Clears the relevant bit of the claim tag.

Summary of Contents for Cortex-A53 MPCore
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cortex-A53 MPCore

Reviews:

Related manuals for Cortex-A53 MPCore

Brands by name

Popular brands

ARM Cortex-A53 MPCore, Technical Reference Manual

Search results

Summary of Contents for Cortex-A53 MPCore

Reviews:

Related manuals for Cortex-A53 MPCore

Brands by name

Popular brands