Angelo Po FX Series, Technical Manual

Page: 119 / 125

Copyright by Servizio Clienti ANGELO PO Spa
119
7.17. Scheduled recommended maintenance
Yearly
Every
two
years
Chapter/
Paragraph
Cleaning air intakes X 7.5
Open the dashboard and replace the seal – clean and check possible
steam leakage
X 7.14
Check components compartment cooling fans working X 7.5
Check motorized valve status and working X 2 pic.7
Check core probe status and working (where present) X 7.7
Check door gasket and steam leakage during cooking. X 7.14
Visual check of the cooking chamber X
Check tightening of the fan fixing screw X 7.2
Check tightening, status and cleaning of the humidity probe X 7.8
cleaning siphon and drain lines X 2 pics14-15
cleaning of water intake filter X 2 pic.10
Check door adjustment X 7.6
A
ll
m
o
d
e
ls
Check lamp gasket X 7.9
check incoming gas pressure and system tightness until gas valve X 4.2
Check and tightening gas system fixing screws (blower fan, gas inlet,
air-gas mixing inlet)
X 4.2.2
Cleaning combustion air intake (filter underneath the oven) X 7.5
Check and cleaning gas valve air intake X 7.5
Check CO and CO2 performing gas flue analyzes X 4.11
Spark plug and gasket replacement and wires check
X
(LPG)
X
(Natural
gas)
7.12
G
a
s
m
o
d
e
ls
o
n
ly
Visual check of heat exchanger gasket X
Check resistance cables tightening X
E
le
c
tr
ic
o
n
ly
Check resistance gasket seal and screws tightening X
Check alarms list in the menu service X 3.2
Replace the pipes in the peristaltic pumps X
Run pump test procedure – check the pumps working X 5.2
Check possible leaks on the fittings of the pumps X 5.2
Check and possible adjustment rinse water pressure X 5.2
Disassemble multi-injector sprinkler and check possible obstructions X 5.2
L
e
v
e
l
3
o
n
ly
Clean inverter air intakes X 3.4